1. The rated capacity of the transformer should be the apparent power of the transformer under the required application standards, which can ensure all the normal load of the transformer to operate normally.

2. This apparent power is the power of the transformer, which is also the apparent power of the transformer that can carry a larger load.

3. When the transformer is running at rated value, the apparent power of the transformer output is equal to the rated capacity.

4. When the transformer rated value is running, the input power of the transformer exceeds the rated capacity.

5. Because the efficiency of the transformer is very high, it is generally felt that when the transformer is running at the rated value, the apparent power of the transformer is equal to the rated capacity, so the AND operation and the results are also accurate.

6. Therefore, when applying a transformer, it is safe to observe the amount of current, operating voltage, power factor, and apparent power at or below the rated capacity output by the transformer (when the application standard is considered).

7. Many people think that the transformer is damaged, so it must be incorrect to operate at the rated capacity of 90 * below!

8. When the volume of the transformer is used in the design scheme, it is right to multiply the safety by the calculated load according to the measured performance.